Glass Break Sensor Setup
How to setup and install a Glass Break Sensor:
- Make sure your Ring Alarm is disarmed.
- In the Ring app, open the menu. Tap Set Up a Device, then tap Security. Tap Sensors and find the Glass Break Sensor.
- Follow the in-app instructions to complete setup.
- Mount the sensor at least 7 feet off the ground and within 25 feet of any glass windows or doors inside your home.
- The Glass Break Sensor can be placed on a shelf or attached to a wall or ceiling.
- Avoid placing on surfaces such as tables or shelves where items are frequently set down and picked up.
- Use the included screws and anchors when mounting on the ceiling or a rough surface.
- If using mounting tape, ensure the mounting surface is clean and dry before peeling the backing off of the adhesive strip.
- Firmly press and hold the Glass Break Sensor in place for 20 seconds to ensure it is securely attached.
- If using the included screws (3x21mm) and anchors (5x25mm), use a 3/16“ (5mm) drill bit to pre-drill holes. Push the anchors in and then use a Philips #2 screwdriver to screw the mounting bracket to the wall or ceiling.
https://support.ring.com/